Scotts Steering Stabilizers - Larger Images

Standard Stabilizer Kit: Bolts on and clamps around the head tube. Each kit is specific to each bike with consideration for which combination of bars and triple clamps are being used.

(stabilizer shown with optional large knob)
SUB-Mount (Stabilizer Under Bars) kits allow more room for other equipment such as a GPS units or computer equipment and still allow quick access to adjust the stabilizer. SUB-mount kits usually raise the handlebar mounting position by about 1 inch which is popular with most riders. The black KTM-style SUB-Mount uses the stock KTM bar mounts and allows the rider to choose between bar positions 3 or 4.

(stabilizer shown with optional large knob and black bar clamps)
Complete CRF Stabilizer Kit using the conversion to oversize bars with the stock triple clamp.

CRF / YZF style SUB-Mount Kit

Bolt-on SUB-Mount Triple Clamp Kit: Use this kit for bikes that do not have "removable bar mounts" such as 1998-2005 YZ/YZ-F/WR models or earlier CR models.

This kit requires oversize handlebars. There is an optional bar reducer kit to adapt 7/8" diameter bars to these oversize mounts. The complete kit includes all necessary hardware and detailed instructions for easy installation. (Kit shown may not be your actual model but depicts what comes in the kit).

Stabilizer Mount Kit only / LOW-Mount: These kits allow the stabilizer to be mounted to the lower triple clamp just above the front fender. Designed to accommodate riders who need the stabilizer off the handlebar area, where the crossbar is too low or other items such as enduro computers, GPS units, etc., might take up too much space.