Motion Pro T-6 Combo Lever
Axle Wrench and Tire Tool
Made from forged 7075 T-6 aluminum, they are functional tire irons the same
size as traditional fanny-pack levers. These levers are tough and durable yet weigh
next to nothing. Opposite the tire spoon is an axle hex wrench that can
be converted into a 3⁄8-inch socket drive via a socket drive insert.
This will eliminate two heavy wrenches in your tool bag. Using these levers, especially the 12/13 combo lever (for rim
locks) with its lipped spoon to keep you from pinching the tube.
Choose between sizes: 12/13mm, 22mm, 24mm, 27mm and 33mm. Also add the 3/8
adapter to your set.
T-6 Combo Lever
Axle Wrench and Tire Tool
3/8" Drive Adapter for T-6 Combo
Lever
Converts axle wrench
into breaker bar
Tire
spoon/axle nut hex wrench Lightweight
forged 7075 T-6 aluminum Hard
anodized finish Under
10 inches in length and weigh only 3.5 oz. Hex
wrench sizes fit most popular motorcycle axle nuts Perfect
fit for Motion Pro T6 Tool Pack Sizes:
22mm, 24mm, 27mm, 32mm and 12/13mm
for rim lock nuts (sold separately) Hex
ends are rated for a maximum torque of 90 ft-lbs. Not
recommended for use with Bib Mousse tubes or tire balls
3/8"
Drive Adapters for T-6 Combo Lever
Allows
your T-6 Combo Lever to be used as a 3/8 in. driver 3/8
in. drive male and 1/4 in. drive female for use with
sockets for smaller front axles Lightweight
billet 7075 T-6 aluminum with chrome
vanadium steel insert Lightening
holes Coin
knurled to facilitate turning sockets by hand 3/8"
square drive is rated for a maximum torque of 90 ft-lbs. Awarded
Product of the Year - Dirt Rider Magazine Dec. 2004
Tire
spoon/axle nut hex wrench
