|
Heavy Duty Ballistic Nylon Fanny
Pack/Fender Bag |
|
|
|
Competition Pack Tool Kit |
Adventure Pack Tool Kit with
T-Handle Pouch |
|
 |
 |
The Competition pack is
compact, low-profile design for riders planning shorter
outings and the Adventure pack is designed for
extended outings where extra gear is necessary. Both can
be worn as a fanny pack or mounted to a rear fender or
bike rack. These durable and lightweight packs are
double sewn and feature heavy duty ballistic nylon
material, self-healing YKK zippers, heavy duty elastic
and quick-release non-slip buckles.
Features: Integrated workbench, custom designed space for T-handle
tool set, vinyl map pocket, pouch for spare loose items,
extra elastic loops to secure gear, removable waist
belts with zippered hip pockets for quick access to
small items, and padded accessory pocket for extras such
as wallet, cell phone or GPS. |
|
 |
|
Sliding T-Handle Tool Set |
Open-end Combination Wrenches |
  |
| The T-handle set is
versatile, light weight and durable. Made from high
quality tool steel, finished in chrome vanadium and set
in die-cut foam, this set will work for most any type of
repair. |
|
|
 |
|
Manufactured from
high quality tool steel and finished in chrome
vanadium for corrosion resistance. Designed with
a flat profile to keep weight down and so they
will store easily in a tool pouch. Included are sizes 8x10mm,
12x13mm, and 12x14mm. Lifetime warranty. |
|
|
 |
|
Safety Wire |
Zip Ties |
|
 |
| We include a 20' spool of .32
gauge stainless steel safety wire with every
kit. Can be used to jurry-rig things like
exhaust pipes with broken mounts or broken
throttle and clutch cables. |
|
|
 |
| We include a
small package of 4-inch plastic removable cable
ties. Weighs less than
.5 oz, our zip ties are just the right size to
pack in our kits. We use cable ties to secure
anything that doesn't get hot including floppy
kick starters, side stands that like to drop
over jumps, hydration tubes, any type of cables,
etc. |
|
|
 |
|
Duct Tape |
Electrical Tape |
 |
Duct tape may be the most
universally used repair item known to man. Flat
Pack Duck Tape® comes in a flattened roll that
contains only 3 yards of tape and weighs just
over 1 oz. This stuff is perfect for any trip
where weight and size are at a premium!
|
|
 |
We include a small roll of
electrical tape with all of our kits. This is
flame resistant 7 mil vinyl, comes in 20 foot
rolls and weighs just over an ounce.
We use electrical tape for everything from
wiring repairs to taping roll charts. |
|
|
 |
|
Loctite |
Low Pressure Tire Gauge |
|
 |
We include a small tube of
Loctite 242 (blue) threadlocker with all our
kits. It is used to secure aluminum fasteners
that range in size from 6mm (1/4") to 20mm
(3/4") in diameter. Weighs less than .2 oz.,
perfect size to pack. |
|
 |
| Our 0-20 PSI tire
gauge coupled with either our CO2 inflator or
our mini air pump allow for quick and easy trail
side adjustments anytime you encounter changes
in riding conditions or need to set your tire
pressure after repairing a flat. |
|
|
 |
|
Tow Strap |
High Intensity LED Flashlight with Visor
Clip |
 |
| Our 15 feet long
tow strap with carrying case has a loop sewn at
both ends, weighs only 3 oz. and is made from
ballistic nylon. |
|
 |
Our flashlight
produces a high-intensity beam, is made from
aircraft aluminum, is o-ring sealed and has
patented circuitry that makes for one tough
design.
Only 3 inches in length and weighs less than 1
oz. Comes equipped with batteries and a pocket
clip. |
|
|
 |
|
Storm Proof Lighter |
QuickSteel Steel Reinforced Epoxy
Putty |
|
 |
The Solo Adventurer™ is
small, aluminum bodied, refillable butane
lighter that produces a high intensity 3700
degree laser flame. This lighter was designed
for outdoor use, is wind proof and can be
adjusted for altitude up to 12,500 feet in
elevation. 2 inches in length and weighs around
2 oz. |
|
|
 |
| QuickSteel™ is a
steel reinforced epoxy putty that sets up in
just 20 minutes and can actually be drilled,
tapped or sanded once hardened. Weighs around 2
oz, comes in a small tube that's ideal as a pack
item. We include this in Stage 2 and 3 Tool
Kits. |
|
|
 |
|
T-7 Tire Tools |
CO2 Inflator and
Tube Patch Kit |
 |
| Our new T-7 Tire
Tools combine an axle wrench and tire spoon in
one. Built in offset for working around forks
and swing arm. Ultra lightweight material that
is both strong and compact. Dimensions: Length - 9", Weight -
Only 3 oz. each! Lifetime Warranty. |
|
|
 |
| The Tire Repair
and CO2 Inflation Kit from Genuine Innovations
is compact, light weight and versatile. The kit
comes with: Microflate mini inflator, 2
threaded 16 gram CO2 cartridges, 4 medium round
patches, 2 small round patches, 2 medium square
patches, and a tube of cement glue. The
Microflate valve is made of tough glass filled
nylon and all brass inner valve parts. Weighs at
only 4.3 ounces. |
|
|
 |
|
Hybrid
Inflator (Aluminum Body Hand Pump) |
Windzone Multi-Tool |
|
 |
| The hybrid pump combines both
a CO2 inflator and hand pump. Works with both
threaded and non-threaded CO2 cartridges. Adapts
to both Presta and Schrader valves. |
|
|
 |
The compact
design Ultima-Tool™ is a solid tool steel
construction and weighs only 9 oz. This tool
contains: Adjustable wrench, Spring loaded
needle nose pliers, Large knife blade, Wood saw,
Flat blade screwdriver, Phillips screwdriver,
File, and Wire cutter/stripper. |
|
|
 |
| Specialty
Tools and Rain cover |
|
|
T-Handle Set (in T-Handle Pouch) |
Rain cover |
  |
| The T-handle set is
versatile, light weight and durable. Made from high
quality tool steel, finished in chrome vanadium and set
in die-cut foam, this set will work for most any type of
repair. |
|
|
 |
| Our Rain Cover is made from
treated, water proof material and made like a
shower cap with a draw string and elastic on the
under side to allow you to secure it around any
of our packs. Weighs less than 1 oz. Can be used
as a goggle pouch or place to hold a pack
jacket. |
|
|
 |
| Torx Bits (Nickel Plated) |
|
|
 |
Our Torx Bits, coupled with
our Bit Adaptor, work with our T-Handle Set.
They are nickel plated to prevent rust and
corrosion! Ranging in size from T10 to T40 our
set up will remove almost any torx bolt your
likely to encounter. Comes in their own plastic
bit holder. |
|
|
|
|
 |